Trampolining is indeed a fun activity for people of all ages. It is a source of immense joy yet health benefits simultaneously. Installing a trampoline in the backyard is no rocket science. But what if you have a slope or uneven ground? No sweat; you can still install the trampoline.
To install a trampoline on uneven ground, you must make some changes to the installation process. This way, you’ll be able to install a trampoline on a slope or a hill. For instance, if it’s a minor slope, you can use an anchor to raise the trampoline legs into the slope.
Trampoline Installation on a Slope or Uneven Ground
As the structure of trampolines is rigid, we often take it amiss, thinking they can’t be installed on uneven ground. However, the ways we have discovered to level the area for a trampoline don’t say so. Let’s check them out.
Placing trampoline on a slope
Installation Process for Minor Slope
Minor slopes, which are only a few degrees, can be handled with a simple procedure. Start with digging small holes on the higher side of the slope. The holes should be big enough to fit the trampoline legs.
While doing so, you must see if the rest of the ground is hard enough to grip the rest of the trampoline legs. You need to ensure that the legs inside the hole are blocked by something, so they don’t keep moving.
It can be as simple as anchoring the legs to the ground. But it is important that you adjust the higher legs in a way that they keep up with the underground ones. You are free to create a barrier as well. A trench or bricks should work fine to dissuade the legs from sliding.
Installation Process for Major Slopes
When it comes to a large slope, the best way is to cut out the terrace from the hill and install the trampoline there. However, this is a job for a professional. If you aren’t skilled enough, avoid doing so on your own.
Now you need to arrange walls to hold the trampoline in place, so it doesn’t run off. The distance between these retaining walls would depend on the small-scale mudslides and the weight they have to hold. Place them closer together if the hill is too large.
For these walls, you can rely on wood or rock. But they shouldn’t be higher than four feet tall or so. You’ll need just one terrace for the trampoline installation.
Another option similar to terracing is grading down the higher portion of the slope. But in this way, you have to ensure that you have two extra feet of graded space. Otherwise, the trampoline is going to hit the edge.
Installation Process for Uneven Ground
Uneven ground is way easier than slopes to deal with. On a smaller scale, the ways mentioned above can work fine. But we have another option for your convenience.
You have to start by lowering one of the legs of the trampoline. This way, the trampoline will be lower on one portion. You can raise the legs you want with leveling blocks.
Once the land is all set, you can install the trampoline following any of the trampoline installation methods. That’s not all; you can even anchor the legs as well.
However, this is the basic way of installing a trampoline on uneven ground. If you raise your budget, you can do the whole faster. There won’t be this much hassle as well.
Understanding Trampoline Leveling Kit
A trampoline leveling kit is a very convenient option to uplift your experience. The levelers are another word for the extension of trampoline legs. These kits are made of heavy-gauge steel. Thus, you can expect lifelong durability from these.
These kits will even allow you to lower or raise the level for balancing the legs. Once you’re done attaching the trampoline legs, start extending or lessening the leveler heights to get proper leveling.
You can get levelers locked using nuts and clamps with trampoline frames and prevent the frame while jumping. Each of the levelers will come with maximum load capacity. Remember not to cross the limit.
Understanding Trampoline-Leveling-Blocks
Leveling blocks are used for leveling the trampoline. They are made of cars and RVs, yet extremely effective for trampolines. Since the blocks are stackable, you can raise or lower the height by attaching or detaching them.
The blocks come with an interlocking system. This allows you to lock one block with another so that the whole structure is rigid and durable enough.
If you put this underneath the trampoline, leveling the uneven surfaces for the installation of a trampoline will become a breeze. You can put as many blocks as you need until you find the leveled surface.
Leveling trampoline on uneven ground
Wrapping Up!
Trampolines are attached to our childhood memories. We would want our kids’ eyes to sparkle with that joy as well. But sloppy and uneven grounds really are bummers in this case.
Yet, we hope our solutions to how to install a trampoline on a slope or uneven ground would be helpful enough. We want no obstacles to snatch the bouncy fun from you and your family.
Frequently Asked Questions
Can I put a trampoline on a slope?
You can do so in some specific cases. Level-1 or 2-degree slopes are almost as level as even ground. Plus, you can build up the soil and work with turf on the lower side. This way, the frame won’t move from the ground easily.
What is the best base for a trampoline?
The ideal surface for a trampoline would be soft ground mainly because this would absorb the impact energy. A bark surface or any sift and energy-absorbing surface will work and provide decent drainage to press the obstacles. Moreover, you won’t even have to cut the grass.
Is Sloppy grounds bad for trampolines?
Yes, they pretty much are! Installing the trampoline on sloppy concrete, tarmac, or hard surfaces is challenging. However, it’s not impossible. There are several methods you can follow. You can dig holes or level the ground for the best results.
Last Updated on August 25, 2023
